Different kinds of Speeds in various segments

By -

Speed: It is defined as the velocity that is created by providing input energy of different kinds that accelerates the body from point A to point B w.r.t time. 

Unit of measurement: meter per second (or) kilometer per hour

There are different ways of measuring speeds depending on the type of transportation and its descriptions. Here are the different kinds of speed and their typical values which are used in different segments for measuring the speed:

Type of SpeedDescriptionTypical Value/RangeUnit
Speed of Light (c)The maximum speed at which all energy, matter, and information in the universe can travel.299,792,458meters per second (m/s)
Speed of Sound (Mach 1)The speed at which sound travels in dry air at 20°C (68°F).343meters per second (m/s)
Escape Velocity (Earth)The minimum speed needed for an object to escape Earth’s gravitational pull.11.2kilometers per second (km/s)
Average Car SpeedTypical speed of a car on highways.100-130kilometers per hour (km/h)
Average Human Walking SpeedNormal walking pace for an adult.1.4meters per second (m/s)
Jet Plane SpeedTypical cruising speed of commercial jet planes.800-900kilometers per hour (km/h)
International Space Station (ISS) SpeedSpeed of the ISS orbiting Earth.7.66kilometers per second (km/s)
Train (High-Speed)Speed of high-speed trains like the Japanese Shinkansen or French TGV.300-400kilometers per hour (km/h)
Cycling SpeedAverage speed for a cyclist.20-30kilometers per hour (km/h)
Usain Bolt’s Top Sprint SpeedThe maximum speed achieved by the fastest human sprinter.12.4meters per second (m/s)
Escape Velocity (Moon)The minimum speed needed to escape the Moon’s gravitational pull.2.38kilometers per second (km/s)

This table gives a variety of speeds ranging from the microscopic to astronomical scales, offering a broad perspective on speed across different contexts. 

Note: In search of extending the list of other speeds, will be updated further in this article . . . 

Location: India

Comments

Post a Comment

Popular Posts

World’s Largest Single Rooftop solar power plant in India

By -
Image
Solar panels installed on the roof with a capacity of 11.5 MW in Punjab state in India India’s solar mission which has kept at a target of 175 GW and the government is trying to keep its word to generate power from all kinds of Renewable Energy Resources. As it is focused on Solar, Wind and Biomass power generation technologies. We all know that a roof is the zero cost of land and uses the space for solar panel installation. There is no requirement of a special setup is installing the solar roof. Depending upon the roof size and shading and direction of the sunlight is considered for setting up the solar panels. But, most of them have small or medium roofs that can generate in kiloWatts (kW) or Megawatt (MW) scale. In Amritsar, there is an installation od 11.5 MW capacity of a solar power plant which is completely covered with solar roof which will benefit 8000 households was built by Radha Saomi Satsang Beas (RSSB), a religious organization in Punjab. Badal along with New and Re
Read more

Recycle Marts development in urban and rural areas

By -
Image
In most of the western countries and developing countries are launching the new concept called the “ Recycling Malls ” in major cities and towns across their countries. The main objective of the recycle mart is to sell the used products (ex: used plastic, glass, paper, etc.). This is an innovative way of making things and helping in reducing environmental pollution in the surroundings across the globe.   There are different kinds of pollutions that are generated effecting Air, Water, Land, Food, Sea, Ocean pollutions. It is damaging the EARTH gradually and impacting directly and indirectly that are highly toxic and increase the scope of new harmful viruses etc.   Issue: Wastes are different types that are generated in the world which is mostly produced by man. Anything that is produced excess and unable to control is added into pollutant list. The recycling plants are getting adopted across the globe with different techniques, methodologies and Strategic ways in collection
Read more

Honda can be the Indian EV Market giant comparing to OEMs

By -
Image
Honda is one of the popular brands in the Indian automobile industry. with the Activa petrol scooter with multiple versions, the company is come up with an electric version which Indian consumers are awaiting for the same. Apart from their plans to launch the electric vehicle in the Indian market, some of the key points are strong enough for Honda can capture a great EV market share in the country. Kinetic Honda is the predecessor for Honda Activa which was a big hit in 90s.  Year wise Activa Models released by Honda:  2001,  2002,  2007,  2008,  2009,  2018,  2019,  2020,  2021 Some of the key advantages for Honda can be a great EV market giant compared with startups and OEMs due to the following: Charging facilities in service stations: As Honda has 334+ service stations [1] across various states in India, the majority of them are bigger compared to other two-wheeler service stations. So a large charging infrastructure network and facility can be developed which can provide easy ac
Read more

Solar Cell efficiency with new polymer devices

By -
Image
India is witnessing a new chapter in the growth of the renewable sector, mainly in the solar sector. Hence, any new breakthrough in the field of solar cells and solar power generation is beneficial for India. New technology is being developed in the University of Chicago within the confines of its chemistry laboratory by Professor “Luping Yu”. A new kind of solar panel was designed and manufactured which has a higher efficiency when compared with the currently running modules used for power generation. The given polymer solar cell consists of a new polymer, called "PID2". The new polymer improves the efficiency of electrical power generation by 15 per cent when added to a standard polymer-fullerene mixture. New light has been shed on solar power generation using devices made with polymers. Researchers identified a new polymer a type of large molecule that forms plastics and other familiar materials which improved the efficiency of solar cells. The group also determined th
Read more

Achieving 175 GW RE Target by INDIA With Extended 450 GW BY 2030 Ambitious Target

By -
Image
The Indian government has kept a target of 175 GW installed capacity using different renewable energy technologies in the country. Currently, the total installed capacity of the country is 367.3 GW of which thermal is 230.72 GW , Nuclear is 6.78 GW , Hydro is 45.4 GW and RE is 84.4 GW as on 31.12.2019. For the month of December 2019 the electricity generated in different power segments is 86.1 BU in thermal, 3.6 BU in Nuclear, 8.9 BU in Hydro and 9.3 BU in RE [1] . Currently, the total renewable installed capacity is 57.472 GW ( 12.5 GW of solar i.e., 21.8% and 32.3 GW of wind i.e., 56.2% ).  Depending upon the current installation frequency, we can forecast whether we can reach the target by 2022 or 2030 . MNRE is exploring with new innovative approach for increasing the capacity of renewable energy in the country and promoting them for the same. [2] Benefits with 175 GW RE target   Reduces the carbon footprints in the country and promotes renewable energy technologies;
Read more